PA Systems

Posts Tagged ‘Amplifier’

How to Hot Rod Your Fender Amp : Modifying your Amplifier for Magical Tone

This guidebook shows owners and dreamers the basics of getting the best sound possible out of their Fender amp with simple and advanced modifications. These include essential and fundamental tips like selecting tubes, capacitors, pots, and other electronic equipment, as well as biasing and setting up your amp. It also covers great hot-rodding enhancements to give you the tone of the pros at your fingertips, such as making one channel into an overdrive channel, modifying tone controls, making on

List Price: $ 27.99

Price:

Pyle PCM20A 40 Watts Power Amplifier with 25 and 70 Volt Output

• Power On/Off Switch & LED Indicator – MIC 1 Front Located 1/4″ Input Jack – Replaceable Fuse
• MIC 1 Output Level Control – MIC 2 Front Located 1/4″ Input Jack – 110/220 Voltage Selector
• MIC 2 Output Level Control – AUX Front Located 1/4″ Input Jack – Detachable AC Power Input
• AUX Output Level Control – MIC 1 Auto Talkover – Dimensions: 7.87”W x 3.15”H x 5.9”D
• Bass and Treble Tone Controls – Speaker Terminals (COM/8-Ohm/25V/70V)

This 40 watt power amplifier provides the juice you need for your 25 V or 70 V PA speaker. The three ¼” jack inputs are conveniently located on the front – two mic inputs and one auxillary input. Mic 1 has an auto-talkover, so you can easily cancel the other inputs. Each input has an independent gain control, and you can also adjust the tone of the sound using the rotary treble and bass faders. Connect your speakers using the rear terminals. Includes a replaceable fuse and detachable AC pow

List Price: $ 122.99

Price:

Yamaha EMX212S 8 Input Powered Mixer with 200 Dual Watt Amplifier

• 8 XLR inputs
• Sturdy cabinet that tilts back for easy access
• Two 7-band graphic EQs
• Built-in digital effects
• Dual 200-watt power amplifiers with YSP

The EMX212S is a powered mixer with 12 inputs, built-in digital reverb and dual 200-watt digital power amplifiers. It is housed in a sturdy, plastic cabinet that tilts back for easy access. The mixer section is an 12-input stereo mixer that has an effects send, a monitor send, and 3-band EQ. FCL (Feedback channel location) helps pinpoint the offending channel when feedback occurs. The effect send is routed to the built-in DSP that provides high quality reverb effects based on the popular SPX pr

List Price: $ 499.00

Price:

Rockford Fosgate Punch P400.2 400-Watt Stereo Amplifier

• 4 Gauge power/ground terminals
• MOSFET output stage and power supply
• 12dB/octave crossover
• Rated Power: 100W x 2 @ 4-Ohms RMS; 200W x 2 @ 2-Ohms RMS; 400W x 1 @ 4-Ohms bridged RMS

# RMS Power @ 4-Ohms: 100W x 2
# RMS Power @ 2-Ohms: 200W x 2
# RMS Power bridged @ 4-Ohms: 400W x 1
# Crossover Controls High-Pass (HP): 50-500Hz 12dB/octave Butterworth, Low-Pass (LP): 50-500Hz 12dB/octave Butterworth
# Dynamic Thermal Management cooling system
# 1 RCA pair Input
# 1 RCA pair Output
# Class A/B Circuit
# Cast aluminum Heat Sink
# 12dB/octave crossover
# 4 Gauge power/ground connections
# Audiophile grade speaker connections
# MOSFET output stage
# MOSFET power supply
# RCA pas

Price:

TE-4102CP23 (with TE-0PA Panel Antenna)Cell Phone Atenna Signal Booster Repeater Amplifier 850Mhz/1900 MHz

• The Booster designed to boost signal strength and ensure reliable coverage for cell phones, no more drop calls or experiencing poor cell phone call
• ALC ensure output level stable and adjustable continuously.
• With the amplified linear power, the intermodulation and and spuriousness are suppressed effectively. Compact design, to easy or and convenient installation.
• Package include a panel antenna which can expand signal coverage and resolve to signal blind area where signal weak or unavailable, such as home, office, public area etc even more.
• Works with Sprint, T-Mobile, AT&T, Verizon, Alltel, Cellular one, ROGER, BELL and any wireless operator on the frequency of1900MHZ PCS System; also Works with (850MHZ) CDMA System;

Signal Boosters improve cell phone coverage by capturing the weak signals at certain frequency range and then amplifying the signals. Boosters do not process the signal, so they cannot distinguish signals and noises. They just simply amplify everything in their operation frequency range. In North America, there are currently two frequency bands than wireless phone services operated within. One is CELL 824 – 894 MHz, the other is PCS 1850-1990 MHz. This cell phone signal repeater/amplifier works

Price:

Find More DJ PA System Products

ChatterVOX Voice Amplifier with Headset Mic

• increases sound by 14 dB
• one switch control for volume and power
• uses NiMH rechargeable batteries or AA alkaline batteries
• includes carrying pouch and charger

This excellent voice amplifier is worn as a “fanny pack”. For use in any situation that requires a boost in speech volume.

List Price: $ 260.00

Price:

Related PA Amplifiers Products

XANTECH PA4100X 4-Channel 100-Watt Amplifier

• 4 channels at 100W RMS per channel
• Designed for any application using a multi-zone preamp that does not require having infrared control built into the amplifier
• DC voltage controlled (main power) low-impedance capability
• Auto protection mode
• Front panel status LEDs

The PA4100X was designed to meet the audio power amplifier needs of custom installed multi-zoned systems with high sonic quality and hi power output. It is a 4-channel amplifier that interfaces with the MRC88 whole-house audio video entertainment system for zones 7 and 8 preamp outputs or for sub-zone amplification of zones 1-6. It may also be used as a standalone 2-zone amplifier.

List Price: $ 1,600.00

Price:

Amplifier- LIL’ PA, Complete Outfit

• Magic Trick
• Easy to Do
• Memorable

At only 10″ x 10″ x 8″, this battery-powered PA system pumps high quality music and voice amplification through a specially designed 5.25″ full range speaker.

A complete portable amplifier.

*Carrying strap
*Mic
*Battery or AC powered for your choice
*Heavy duty full range speaker
*Powerful 20 watt internal amplifier

Includes 1/4″ phone jack for mic and 1/8″ mini jack for music or other aux input.

The Pignose LIL” PA is loud for its size. It can be haard up to 1/2 mile away. Use with CD, Radi

Price:

Bose 802 III Loudspeakers Bose Pro Audio Portable Sound System Package Includes Yamaha P2500S Amplifier

• Bose 802 Panaray Series III Loudspeaker
• Eight proprietary 4.5-inch full-range drivers
• Wide-range reproduction over a broad dispersion area
• A rugged, portable eclosure with metal grille and protective cover with carrying handle
• Low profile, aesthetic styling

This System Includes: 2-Bose 802 Panaray Series III Loudspeaker, 1-Bose Panaray System Digital Controller II, 1-Yamaha P2500S Power Amplifier, 2-Ultimate Support JS-TS50 Speaker Stand, 2-Ultimate Support BMB-200K Mounting Bracket, 2-Whirlwind Speaker Cable Speakon to Speakon 25′, 2-Whirlwind XLR Microphone Cable 3′. Get the audio quality, versatility and durability you need with the new 802 Series II loudspeaker. We enhanced our flagship professional speaker to deliver high-output performances f

List Price: $ 4,005.00

Price:

Pyle PTA2 Mini 2x40W Stereo Power Amplifier

• 2X40W Max 10% RMS At 4-Ohm
• Switchable Mic Pager and Mixing Modes
• Switchable RCA Input AUX1/AUX2/CD
• RCA REC Output
• 1/4″ Mic Input Jack

Pyle Pro’s PTA2 combines the usefulness of a small, take-anywhere amplifier with a full featured mixer. Three stereo line-level inputs and a 1/4″ microphone input are provided for source connection and mixing. A pager switch provides source attenuation for microphone priority. Stereo recording is made possible by the built-in line-level outputs. Balance, tone, speaker volume, microphone volume, power, and source selection controls are front-mounted for quick adjustment

List Price: $ 142.99

Price:

More PA System Mixers Products